113
Clamps of cooling system hoses
0.4–0.45
Clamps of heating system hoses
0.25–0.35
Cooling system radiator bolts
3.2–3.6
Bolts of idle governor clamp
0.6–0.9
Detonation sensor nut
1.5–2.0
Sensors bolts (camshaft position sensor, crankshaft position sensor)
0.6–0.9
Bolts of timing sensor, absolute pressure sensor and temperature sensor
0.6–0.9
Cooling system temperature sensor
1.2–1.8
Air temperature sensor
1.2–1.8
Oxygen sensor
3.5
Sensor of throttle gate position
0.3
Ignition coil bolts
0.6–0.9
Nuts of bolts in propeller shaft flanges
4.4–5.6
Bolts and nuts of gearbox and transfer case
4.0–5.6
Nut between flange and axle drive gear
17–21
Bolts between axle driven gear and differential case
10–14
Differential carrier bolts
3.6–5.0
nuts of leaf spring U-bolts
9–10
nuts of shackle pins (for vehicles w/ABS)
8.5–9.5
nuts of leaf springs axle (for vehicles w/ABS)
16–18
Wheels nuts
10–12
Bolts of front axle drive flanges and rear axle shafts
6.0–7.0
nut between drag link and shaft
20–28
nuts of steering trapezium ball studs
6.0–8.0
Bolts of front disc brake support
14–16
Bolts of rear brake shields
4.4–5.6
Tie rods locknuts
10.5–13.0
Ball struts bolts
3.6–5.0
locknuts of wheel hubs bearings
2.0–2.5
Pin nut
8.0–10.0
Note — Use the following tightening torque for other threaded couplings:
М6 — (0.45–1.0);
М8 — (1.4–1.8);
М10 — (3.0–3.5) kgf ∙ m.
Appendix 2 (continued)
