UAV-1002156-001
ECCN 7A994
Page
14 | 31
Modifications and use outside of intended scope
This device has been designed and tested to conform to all applicable
standards in the original form and when configured with the components
shipped with the device. It is not permissible to modify the device, use the
device for any use outside of the intended scope, or use the device with
any antenna other than the one shipped with the device.
Important Pilot Advisory Note Regarding Safety of Radio Frequency
Energy
Safe use of this device requires care as to the placement of the antenna.
Place the antenna at least 4cm away from any part of your body or that of
other cabin occupants. To stop all RF emissions, remove power from the
equipment or configure the equipment for receive mode only. Retain these
instructions with your maintenance logs/files and for future reference.
FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits (Table 1 of
47Pt1 (i) 1.1310) set forth for a Public/Uncontrolled environment.
Mode-S or ATCRBS
According to CAP1391 regulations, if the aircraft has an operating Mode-S
transponder or ATCRBS beacon, the SkyEcho transmitter must be
deactivated. Receive functionality may still be used. Deactivation of the
transmitter is accomplished by removing device power or disabling the
transmit capability via the configuration settings. These regulations are
subject to change. Please be informed of the most current regulations at:
Proximity to other equipment
Mount the SkyEcho 2 so that it does not compromise the operation of any
other proximate communication or navigation antenna or system. It may be
possible to hear transmissions through installed audio equipment, such as
headsets.
