UAV-1000xxx-001
ECCN 7A994
Page
24 | 32
9 Configuration
The transponder system should be configured during initial system
installation by a qualified technician. The configuration items list below
should be used to document the system installation for future reference.
Configuration Item
Default
Setting
ICAO Number
0x000000
VFR Squawk Code
1200
Callsign
“SELF “
Aircraft Maximum Speed
Not Available
Aircraft Category
UAV (14)
ADS-B RX Capability
UAT RX
NO
ES1090 RX
NO
Configuration Items List
9.1 ICAO Number
The ICAO address is a 24-bit number issued to the aircraft by the
registration authority of the aircraft. These addresses are usually written as
a 6-digit hexadecimal number, although you may also encounter one
written as an 8-digit octal number. The FYXnav understands the
hexadecimal format. An octal number must be converted to hexadecimal
format before entering.
9.2 VFR Squawk Code
VFR squawk (Mode 3/A) code is a pre-programmed default code when the
pilot is flying VFR and not in contact with ATC. In the USA, the VFR
squawk code is 1200 and in most parts of Europe the VFR squawk code is
7000.
9.3 Callsign
The callsign (aka VFR Flight ID) is an 8 character code that corresponds to
the tail number of the aircraft. (0-9, A-Z).
9.4 Aircraft Maximum Speed
