UAV-1000711-001
ECCN 7A994
Page
19 | 24
12.59
0.12
3108801
When routing the cable:
•
Route the cable away from sources of heat
•
Route the cable wiring away from potential interference sources such
as ignition wiring, 400Hz generators, fluorescent lighting and electric
motors
•
Allow a minimum separation of 300mm from an ADF antenna cable
•
Keep the cable run as short as possible
•
Avoid routing the cable around tight bends
•
Avoid kinking the cable, even temporarily, during installation
•
Secure the cable so that it cannot interfere with other systems
