uAvionix George G3, Руководство пользователя

Страница: 55 / 55

_________________________________________________________________
UAV-1005752-001 Rev C
Page 55 |
55
6.6.4 Transponder Control
Connect the new Mission Planner to the George G3 AutoPilot via a C2 link
or direct USB connection to the PC. On the Data screen under the
“Transponder” tab click “Connect To Transponder.”
The status of the button will change to “Transponder Connected!” when a
successful connection is made.
From this tab the user can control the mode of the t
ransponder, “STBY”,
“ON”, “ALT”, enable “IDENT”, input a FlightID, and modify the “Squawk”
code.
Transponder status is displayed in the right-hand window and shows
Transponder functionality status, GPS Status, and On Ground status. NIC
and NACp metrics are also displayed under the “Squawk” code box.