_________________________________________________________________
UAV-1005752-001 Rev C
Page
23 |
55
6.2.3 Verify Link
To verify link go to the Status Tab of the skyLinkApp. When the data
arrives, skyLinkApp will begin graphing the radio link statistics.
6.3 Connecting George to Mission Planner
(If using a Ping200X please go to section 6.5.6 for AutoPilot configuration.)
Download and install Mission Planner from:
http://firmware.ardupilot.org/Tools/MissionPlanner/
http://ardupilot.org/planner/docs/mission-planner-installation.html
6.3.1 George Direct Connect
Connect the George AutoPilot directly to a PC using a micro-USB cable.
The connection point on the George AutoPilot is on the left side of the
Cube Orange. The cube Orange can be accessed by removing the carbon
fiber side panels on the George by removing the three screws with a T5
driver. External power must be supplied to the George AutoPilot.
Содержание George G3
Страница 40: ..._________________________________________________________________ UAV 1005752 001 Rev C Page 40 55 ...
Страница 50: ..._________________________________________________________________ UAV 1005752 001 Rev C Page 50 55 ...
Страница 51: ..._________________________________________________________________ UAV 1005752 001 Rev C Page 51 55 ...
