UAV-1004233-001, AV-30-E Pilot’s Guide
26
Revision A
6.3.4 DG Mode – Operational Aspects
The following applies to operation in DG mode:
•
As with the AI mode, three customizable pages can be setup
by the pilot. Each page can be configured to show any of the
above three display modes.
•
Non-Slaved Heading mode requires the pilot to set the initial
heading and occasionally correct the heading based on the
wet compass. The system will initialize to the last set
heading on shutdown.
•
GPS HSI and ARC modes are for VFR operations only. No
vertical deviations are shown, and lateral deviations are not
scaled for approach / IFR operations.
•
Air data / temperature related parameters (TAS, DALT, OAT)
are only available if the DG has been connected to and OAT
probe, otherwise they will not be selectable for display.
•
The currently displayed GPS track may optionally be
gyroscopically stabilized, allow smoother operation when in
turns. This option is configured in the pilot accessible Setup
Menu (GPS Track Stabilization).
6.4 Reversionary Fourth-Page Attitude / Slip
The fourth page of both the AI and DG operating modes consists of a
reversionary style display of just attitude and slip. This page / mode
cannot be customized by the pilot.
Figure 21 – AI/DG Fourth Page - Reversionary AI