Page 6
MN Series Product Guide
3.0
Setting up and Using the Timeclock
Now that you have set up your uAttend account, you may mount your Timeclock and link it to your
account.
3.1 Mounting Your Timeclock
Follow these steps to mount your Timeclock to a wall:
1.
Find a location near a power outlet and a router, switch, or Ethernet network
point where you would like to mount the Timeclock.
NOTE:
Make sure you mount your Timeclock low enough on the wall so that the
camera can take photos of all employees regardless of height. When mounted, the
Timeclock will be tilted up at an angle.
NOTE:
Make sure that the Timeclock is mounted in a location where there will be
no mirrors or direct light on the camera lens.
2.
Line up the mounting paper on the wall where you would like to mount the
Timeclock.
3.
Drill holes into the wall, using the marks on the mounting paper as a guide.
4.
Hammer the dowels into the holes that you drilled.
5.
On the mounting bracket, remove the oval-shaped cable hole to allow room for
the cables to be pulled through.
6.
Attach the power cord and the Ethernet cable to the back of the Timeclock.
7.
Line up the mounting bracket against the dowels and attach the screws through
the mounting bracket into the dowels.
8.
Screw the metal back plate into the mounting bracket.
9.
Affix the Timeclock to the metal back plate by lining up the slots in the back of the
Timeclock to the metal prongs on the back plate. Push down lightly to make sure
the Timeclock is securely fastened to the back plate.
10.
Plug the Ethernet cable into the router.
11.
Plug the power cord into the power outlet.
