UAS Smokeeter SE 24, Руководство пользователя

Страница: 12 / 24

8
— The unicell and prefilter can be cleaned by soaking
in a hot solution of SMOKEETER/CRYSTAL-AIRE
brand detergent for about 30 minutes.
CAUTION: Do not use temperatures exceeding 160°F
and do not steam clean as this may cause
permanent damage to the unicell. If deter-
gent other than SMOKEETER/CRYSTAL-
AIRE is used, care must be taken to
assure that it contains an aluminum
inhibitor so that it does not attack the
aluminum components. Be sure to follow
manufacturer’s cleaning instructions.
— Remove the components from the detergent bath
and immediately flush away any residue. Rinse thor-
oughly with hot water. Shake off excess water and
let components dry for 30-60 minutes. Set the
unicell so that its plates are in a vertical position for
drainage. Do not reinstall the unicell until it is thor-
oughly dry.
— Vacuum the interior of the cabinet to remove any
loose lint or dust that may have accumulated.
— Clean the faceplate grille by wiping down with a lint-
free, soft cloth and a suitable household cleaner.
— Reinstall or replace the afterfilter.
— Reinstall the unicell with prefilter, making sure the
high voltage plug-in connectors are securely con-
nected to the unicell.
— Secure faceplate grille and turn unit on.
If the indicator lamp flickers or does not come on at
all, the unicell assembly was not thoroughly dry. Air
passing through the unit will dry out the unicell and
the lamp will eventually turn on.