UAB NAVITUS LT MCL 5 IP, Руководство пользователя

Страница: 17 / 32

17
6.2. Procedure of Local Parameterization
Access to the controller can be protected by a password. Two levels of users are possible: admin login and
user login. Each login has separate menus and control functions. Parameterization can be handled using
HyperTerminal (Figure 6.2-1, Figure 6.2-2) or other software allowing connecting MCL via
device’s USB
interface. The settings of a COM port for parameterization are independent from the settings for the data
readout and can be set as follows:
115200 bps, parity - none, 8 data bits and flow control - none .
After parameterization user must restart the controller's using the reset function in the menu.
Important! To load or re-
load controller’s menu press button ESC (on keyboard)
3 times.
Enter a name for the new connection (Figure 6.2-1)
Figure 6.2-1
Select a port MCL is connected to (Figure 6.2-2)
Figure 6.2-2
After pressing
OK in the COM Properties window (figure 6.2-3), the settings are set to Auto detect by default
(figure 6.2-4).