U-Turn Tandem U2 DHV 1, Руководство пользователя

Страница: 16 / 35

Suspension System Of The U2
Lines
The U2 lines are made of 1.1, 1.3, 1.6, 1.9 and 2.3mm
Tai-Gu lines with a specially twisted Co-Aramid-heart. This high
tech line is extremely tear-resistant and stretch-stable. This is
essential to avoid changes of flight behavior due to differentialstret-
ching.
The suspension line system is formed of single lines, looped and sewn
at both ends. Suspension lines and brake lines bifurcate in the upper
area.
The lines of one wing are collected to 5 groups:
A: A1-A2
A: A3-A4
B: B1-B5
C: C1-C4
D: D1-D4
The lines are coloured to support easy identification, handling and con-
trol. Special line collectors on the maillons prevent slipping of the lines.
The main brake lines go thorough pullies at the D-risers.
They are marked with a black dot at the point where the brake handle
is fixed. This adjustment allows enough travel in extreme flight situa-
tions and for landing and should not be changed .
Seite 18
Technische Daten
More construction details including line lengths of the U-Turn FAT
WILLIE can be obtained from the certification specification sheets
which form part of this manual.
At the time of delivery this glider conforms to DHV and AFNOR (SHV
and ACPUL) requirements (see certification information as part of this
manual).
Any changes made to the glider by the purchaser invalidate its
certification.
Use this paraglider at your own risk. Each pilot is responsible for
his / her own safety.
Perform a careful pre-flight check of the glider before each flight.