U-Turn SECURE 3 Series, Руководство пользователя

Страница: 8 / 18

Panel Adjustment
In this example we are assuming parachute type SECURE 3 RIS UL which has 20 panels. The adjust-
ment other parachutes differs only in the number of panels, but is done always in the same way. Take
panel 1 and count to the half of the panels (for example SECURE 3RIS XL/UL – count to 10) and
put the divided lines to the left and to the right (see picture 3). Now the panels 1-10 are on the right
side and on the left side you have panels 11-20. To lay out the panels start with number 10. This is
done with following procedure: Take panel 10 and pull the panels towards you. Place panel by panel,
beginning by 10 counting to 1 in that way that the lines are be placed between your thumb and your
forefinger of your right hand. Be sure that lines 10-1, while retaking, are between your forefinger and
middle finger of your right hand. After that, panel 20-11 will be placed between thumb and forefin-
ger.
(Picture 3) (Picture 4)
ATTENTION: Be sure to remove the line which was pulled
through the packing loops.
In case of not removing this, the parachute will NOT open!
If you are using a special packing device, looking like a comb, this device will now be put on top of
the lines. The canopy now will be divided in that way that the stamped panel (in this case
No.20) lays on the top left. Align the top of the chute which is presently held with the packing loops.
(Picture 5) (Picture 6)
Seite 6