- 8 -
3.2 Installing Exterior Assembly
Step 1.
Insert the spindle into the Exterior Assembly’s hole.
If the thickness of the door is between 1-9/16'' to 2-3/8'' (40mm to 60mm), please use Spindle A (3-1/8'', 80mm).
If the thickness of the door is between 2-3/8'' to 3-1/8'' (60mm to 80mm), please use Spindle B (4'',100mm).
If the thickness of the door is between 3-1/8'' to 4'' (80mm to 100mm), please use Spindle C (4-3/4'', 120mm).
Step 2.
Adjust the arrow pointing to the handle.
Note: This step is very important, otherwise UL300 handle can’t work correctly.
Step 3.
Pass the cable above the Mortise.
Step 4.
Insert two screw into the holes, and pass the Spindle through the Spindle hole of the Mortise.
Attach the Exterior Assembly on the door.
Note:
Before installing the Interior Assembly Mounting Plate, please keep steady the Exterior Assembly.
Be sure not to move it.
ENGLISH
