ENGLISH
- 18 -
4.4 Delete Admin and User
Please reset the lock to Factory Default Mode to delete Admin
and all Users.
How to reset the lock in Standalone Mode?
Please use a Reset Needle to push the Reset Button (at the
bottom of Interior Assembly) for around 3 seconds until you
hear one long beep and two short beeps.
FAQ
1. How to exclude my lock from a Z-Wave hub?
In the hub interface, find the place to remove the lock or follow
the hub instructions to put the hub into exclusion mode.
Open U-tec App
，
go to
Lock Settings
, select
Z-Wave Control
，
tap
Remove my lock from Z-Wave hub
, then follow the App
instructions to complete the process.
2. How to reset my Z-Wave lock?
Please note all data will be erased if you reset U-Bolt Pro Z-Wave
to factory default. Use this procedure only when your Z-Wave
hub is missing or otherwise inoperable.
Please note that removing your lock from a Z-Wave network does
not reset your lock. You still need to do the following operations if
a reset is to be done.
If you are using U-tec App as Owner, please click “Delete and
Reset” to remove the lock from your U-tec Account, then use a
Reset Needle to push the Reset Button (at the bottom of Interior
Assembly) for around 3 seconds until you hear one long beep and
two short beeps.
If U-Bolt Pro Z-Wave is working as Standalone Mode, please use a
Reset Needle to push the Reset Button (at the bottom of Interior
Assembly) for around 3 seconds until you hear one long beep and
two short beeps.
3. Can I still use U-tec App when my lock is
connected to a Z-Wave hub?
Yes, Ultraloq Z-Wave lock can be operated from both the Z-Wave
hub interface and U-tec App.
4. What if I lost the paired smartphone?
Please go to
www.u-tec.com/myutec.html
or login
U-tec App
via another smartphone to change your U-tec Account password.
