USWD500 User’s Manual Version 3.0
- 34 -
Obtaining Regulatory Approval
All commercial RF devices must display a regulatory label on the host case of the
product. You must obtain the regulatory certification for each country in which your
product will be sold.
Final Assembly Testing
It is important to perform an end-to-end test to ensure proper assembly of the final
product and to prove that the final product can receive and transmit at the required
signal levels. Refer to
Chapter 3
,
“Installation and Setup”
on Page 12 to verify
that all connections to the USWD500 Modem are made correctly.
Installation and Field Testing
To guarantee that your device is located in an area of good CDPD coverage and
that end-to-end loop-back messaging is possible, you must perform an installation
and field testing procedure. Refer to
Chapter 3
,
“Installation and Setup”
on
Page
12 to determine testing procedures for both installation and connection to
the CDPD network.
Содержание USWD500
Страница 46: ...USWD500 User s Manual Version 3 0 42 ...
