For questions or concerns, email: [email protected]
6
① Heat Indicator: When lit, the machine is heating the workpiece.
② Retaining Indicator: When lit, heat is retained using the current set by the Retain
Power Adjustment Knob.
③ Cooling Indicator: When lit, current is no longer running through the coil,
allowing for the workpiece to cool down.
④ Heat Power Adjustment Knob: Controls the current going through the coil in
manual mode, and during the heating portion in automatic mode. It is recommended
to start at a low current when first turning the machine on, and then slowly increase
the current by rotating the knob as the machine warms up. The more this knob is
turned clockwise, the higher the temperature of the workpiece will get.
VI. Front Panel in Auto Mode
