U.S. Solid Ba+ery Spot Welder USS-BSW00007 Manual, Version 4.1, 2022.8.16
‘AT’ Mode - c Welding Mode
Set the ‘AT’ welding mode Press two welding electrodes on Check the welding effect
welding pieces with an enough
and uniform pressure, welding
pulse will be released automa?cally
a]er a short delay.
‘MT’ Mode - Foot Pedal Switch Controlling Mode
Set the ‘MT’ welding Plug in the foot pedal Press two welding electrodes Check the welding
mode switch on welding pieces with an effect
enough and uniform pressure,
step on the foot pedal switch,
welding pulse is released a]er
a short delay.
Tips:
1.
The 73B/75A welding pen and 73S welding arm are all compaSble with ‘AT/MT’ two
welding modes.
2.
Put enough pressure on two welding electrodes to get the welding pieces and welding
surface fully contacted, otherwise the welding pieces will be penetrated and cause a
bad welding effect.
3.
‘MT’ welding mode is recommended for new user, a_er ge[ng familiar with the
welding operaSon(such as welding power se[ng and welding pressure adjustment),
you can switch to the ‘AT’ automaSc welding mode to finish welding work quickly and
efficiently.
4.
In ‘AT’ quick welding mode, please o_en check the welding effect to avoid bad
welding.
9
