U.S. Solar Mounts 30 Series, Руководство по установке

Страница: 11 / 20

11
8.
Array Assembly
North
Set Bolts
Steel Pole
1. Unpack the Slip-Fitter Assembly and
lower it onto the top of the pole.
You’ll need to back the Set Bolts out in
order to install the Slip-Fitter onto the
pole.
MAKE SURE that the Angle Brace Tab is
aimed DUE NORTH.
2. Once the Slip-Fitter is in place and
properly aligned, securely tighten the Set
Bolts.
Optional Step for High-Wind Areas
There is an extra 3/8
” hole through the Slip-Fitter
located directly above the North Set Bolt. This
hole is for an Optional Roll Pin in extremely high-
wind areas.
1. Using the hole in the Slip-Fitter as a
guide, drill a hole through the side wall of
the pipe.
The hole has been sized for a 3/8
” pin.
2. Insert a 3/8
” Roll Pin into the hole.
3. Tap/drive the pin through the Slip-Fitter
and through the pole until it is nearly
flush. Take care not to damage the Slip-
Fitter’s paint.
Optional Roll Pin