A S S E M B LY
14
Surface Prep
Division
P: 877-817- 6687 F: 813-621-7125
Visit us at www.ussaws.com
8.2
Your Dust Buggy requires the installation of the handle and
pointer before it is ready for use.
Recommended tools:
• Ratchet and Sockets
• Wrench
• Allen Keys
• Pliers
8.1
Install pointer as shown
8.1.1
We recommend that the pointer be adjusted so
that it is next to the crack to be cut, not in it.
8.1.2
This makes it easier to see if one is cutting
straight while keeping the pointer from being affected by
debris in the crack.
8.3
Install handle as shown
The Dust Buggy handle comes pre-assembled and simply needs to be
bolted to the rolling chassis.
8.3.1
Begin with bolting the main handle to the chassis. Make sure
to place the supplied bent handle washer opposite to the chassis as
shown.
8.3.2
Follow by removing the bolt from the clamp weldment and then
thread it through the handle adjustment lever.
8.3.3
Insert the free loop of the handle spring through the hole in the
chassis. We recommend using a pair of pliers to aid this process.
8.3.4
Cycle the height adjustment mechanism to ensure that
everything is working correctly.
8.0
ASSEMBLY
