background image

12/10 revised 5/14 FROM NO. 56041875 REV B

CAUTION:  DO NOT OPERATE MACHINE UNTIL YOU HAVE READ 

ALL SECTIONS OF THIS INSTRUCTION MANUAL

IMPROPER USE OF THE MACHINE WILL VOID THE WARRANTY

1.  Never use the Booster Heat when solvent is in the machine.
2.  Never attempt to heat solvent above 130 °F.
3.  Always use a non

fl

 ammable solvent with a 

fl

 ash point of 140 °F or higher.

4.  The recovery bucket should be emptied each time the holding tank is 

fi

 lled.

5.  Always make sure the 

fl

 oat travels freely up and down the rod after emptying the recovery bucket.

6.  Always vacuum out the stainless steel tank and solution lines when switching from a solvent to a  

 

 

water based detergent, and vice versa (see Operating Instructions).

7.  Always use a drop cloth under the machine during operation.
8.  Vacuum any unused solution out of the solution tank and empty the recovery bucket after each job.
9.  Keep machine from rain and snow, extremes in temperatures, and store in a heated location.     

 

Use the machine indoors.  Do not use outdoors.

10.  Do not run the pump dry.
11.  Never operate a machine that is leaking or in need of a repair.
12.  Always use a defoamer.  The vacuum shut-off will not activate properly if foam is in the recovery  

 

 

bucket.  Water damage to the vacuum motor or other components will void the warranty.

If you have any questions before you operate the machine, call your supplier for instruction.

THE ULTIMATE: PB111

EXTRACTOR

MODELS: PB111-120, PB111-120-DZ, PB111-120-S, 
PB111-120-B, PB111-120-SP, PB111-120-SS,
PB111-240

INFORMATION AND 

OPERATING 

INSTRUCTIONS

DO NOT SMOKE WHEN USING HYDROCARBON-BASED SOLVENTS. 

Even solvents with a 

fl

 ash point above 140 °F can be ignited, especially as an aerosol from the wand.

https://harrissupplyind.com - To Order Parts Call 608-268-8080

Содержание PB111-120





















Отзывы: