4
NOTE
: Ozone destroys odor causing molecules, thus eliminating the source of the odor. The length of
time this process takes will vary depending on the amount of contaminants the ozone has to work on, the
amount of area being treated, temperature and humidity, the amount and type of furniture in the area, etc.
NOTE:
the process can produce a haze in the treatment area.
HOSE
CLAMP
FOAM
Figure 1
Figure 2
TIME GUIDELINES:
This Oasis Plus unit will control biological contamination and odor in areas up to 40,000 FT
3
.
Use the following times as a guideline.
Hotel/Motel Room:
20 -- 60 Minutes
Automobiles:
20 -- 30 Minutes
Fire & Flood Restoration:
12 -- 72 Hours.
For Automobiles:
Refer to Figure 1 and Figure 2 below
1.
Install the hose onto the electrode chamber. Secure the hose with the hose clamp.
2.
Set the Ozone Plus on top of the car or on a cart or table next to the car.
3.
Install the foam block into a partially closed car window, and insert the hose through the
hole in the foam.
4.
Set the time and the output level.
5.
Turn the ozone machine ON.
When treatment is complete, ventilate the car completely. Repeat treatment if necessary.
