7
DANGER: always unplug the King Cobra from the electrical outlet(s) before
cleaning or maintaining. Certain internal components are electrically live,
even with switches in their OFF position.
Dump
Pump
AUTO-DUMP
Dump Hose
Connection
AUTO-DUMP
1 Operation:
Before each use: if necessary, unscrew the stainless steel fi lter at the bottom of the recovery tank
and clean it.
• Attach a 3/4” garden hose to the dump pump outlet fi tting on the pump on the back of the base of the
machine. Refer to illustration below
• Run the other end of the hose into a drain.
• Turn the dump pump switch ON (switch is located on the back of the machine next to the pump).
• NOTE: the dump pump is ‘self-priming.’ You should see water start to fl ow within 30 seconds of the
pump turning on, if the water level in the tank is high enough. If water does not begin to fl ow, check
the
fi lter to make sure it is not plugged with debris.
After each job: run clear water though the dump pump to wash out any chemical residue.
Remove and clean the stainless steel fi lter in the back of the tank. Reinstall the fi lter once it is clean.
Empty and clean the recovery tank.
Pump
ON/OFF
Switch
DANGER: DO NOT USE OR PICK-UP SOLVENTS, OR ANY
CHEMICALS THAT MAY BE FLAMMABLE, EXPLOSIVE OR
COMBUSTIBLE.
