SKU 66804
For technical questions, please call 1-800-444-3353.
Page 4
SpeciFicationS
Voltage
Ranges: 3-48VDC
Accessories
2 probes, 2 clamps,
adaptor
note:
This tool should only be used with
DC voltage systems less than or
equal to 48V.
unpacking
When unpacking, check to make
sure that the item is intact and undam-
aged. If any parts are missing or broken,
please call Harbor Freight Tools at the
number shown on the cover of this manual
as soon as possible.
operating inStructionS
read the entire important
SaFetY inFormation
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
tool Set up
to preVent
SeriouS injurY
From acciDental
operation:
electrical Shock can
cauSe Death or injurY.
aVoiD touching eXpoSeD
conDuctorS oF
electricitY.
Long Needle Probe
Short Needle
Probe
Negative Charge Clip
Alligator Clamp
with Rubber
Sleeve
Alligator Clamp with
Plastic Frame
Adaptor
Handle
Cord
Figure 1
Choose which attachment is best suited
for the task and attach it to the brass tube
on the end of the Handle. Possible con-
figurations are:
Thread either one of the Needle
•
Probes into the socket of the
handle. Remove the protective cap
from the pointed end of the Probe.
Thread the Long Needle Probe into
•
the socket of the handle. Remove
the protective cap from the pointed
end of the Probe and insert the
Probe into the socket of the Alliga-
tor Clamp with the Rubber Sleeve.
Push it in until it is secure.
Attach the Adaptor to the socket of
•
the handle by pushing it all the way
in. Attach the Alligator Clamp with
the Plastic Frame to the Adaptor.
general operating instruction
Do not test voltage on DC circuits
higher than 48 volts.
Attach the Negative Charge Clip to a
1.
good ground.