Page 4
For technical questions, please call 1-888-866-5797.
Tech Cart
Assembly Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document
including all text under subheadings therein before set up or use of this product.
Note:
Finger tighten hardware until assembly is
complete. Separate the 18 Long Bolts (8) from
the 34 Bolts (2) to make assembly simpler.
1. Assemble on a flat, level, hard and smooth surface
capable of safely supporting a fully loaded Cart.
2. Attach two Fixed Casters (12) to one side of the
Bottom Shelf (11), using eight sets of Bolts (8),
Flat Washers (3) and Nuts (4).
3. Attach two Locking Swivel Casters (10) to the other
side, using eight sets of Bolts (8), Flat Washers (3)
and Nuts (4).
Fixed
Caster
(12)
Locking
Swivel
Caster (10)
Bottom
Shelf
(11)
Nut
(4)
Flat
Washer
(3)
Bolt
(8)
4. Attach a Cross Support (9) between a
Left-Handed Post (6) and a Right-Handed Post (1),
using four Bolts (2) and Nuts (4).
5. Repeat with other Cross Support and Posts.
Bolt
(2)
Nut
(4)
Cross
Support
(9)
Left-Handed
Post (6)
Right-Handed
Post (1)
6. Attach Posts with Cross Supports to the
outside corners of the Bottom Shelf, using
sixteen sets of Bolts (2) and Nuts (4).
Bolt
(2)
Nut
(4)
WARNING!
The chest is heavy; do not attempt to lift
and lower onto Cross Supports without assistance.
7. Lock Swivel Casters.
8. With assistance, lift up the Chest (5), then
lower it carefully between the Posts until its
bottom edges rest on the Cross Supports.
9. Attach the Handle (7) to lower holes on same
side as Locking Swivel Casters, using two
Bolts (8), Flat Washers (3) and Nuts (4).
10. Secure Posts to Chest using fourteen sets of
Bolts (2), Flat Washers (3) and Nuts (4).
Chest
(5)
Handle
(7)
Bolt
(8)
Bolt
(2)
