24
Step2 Obtain Control Solution
Shake the control solution vial well. Remove
the cap from the control solution bottle. Place
cap on flat surface. Squeeze the vial, discard
the first drop, and wipe off the dispenser tip to
prevent contamination. Squeeze the vial again
to produce another drop and
place this drop
on the top of cap.
Step3 Apply Control Solution
While holding the meter, move the absorbent
hole of the test strip to touch the drop of
control solution. Then the drop will be
automatically absorbed. Once the confirmation
window fills completely, the meter will begin to
count down.
To avoid contaminating the control solution with
the contents of the test strip, you have to place
a drop of control solution on a clean surface. Do
not directly apply control solution to a strip.
