12
6. Setup
6.1 Copy Area
There are 4 submenu modes.
Scroll to select "6.1 Copy Area”, then press "OK.” Then scroll through to select
one of the four copy methods.
6.1.1 System and Files
Copies data and skips empty space. Only supports standardized formats.
Scroll to select "System and Files”, then press "OK" to save the copy method.
Allows user to copy source device’s System and Files, instead of the entire
device. The system will analyze the source device and identify the data area to
copy. If the source device’s data is within the target device’s capacity, the copy
will be processed. FAT16/32/64, NTFS, EXT2/EXT3/EXT4, and HFS/HFS+/HFSX are
supported in this copy mode.
6.1.2 All Partitions
Copies all partitions and data, unallocated partitions not included.
Scroll to select "All Partitions”, then press "OK" to save the copy method.
The target device’s capacity must be equal to or larger than the source device’s
capacity.
Only 120G data area will be copied.
Source
Duplication
Target
500GB
150GB
Unallocated
Partition
Partition1 (150GB)
Data 30 GB
Data 30G
Partition2 (200GB)
Data 90GB