U-Reach MD801, Руководство пользователя

Страница: 35 / 48

35
II. Function
(Disc Duplicator)
● Eject Target Only: Only eject target trays with disc inside once the system
is booted up.
● Eject Source Only: Only eject source disc once the system is booted up.
● Eject All Trays: To eject all trays once the system is booted up.
8-5. Reader Speed
This setting allows you to adjust the reading speed of source drive. The
default setting of reader speed of CD is 40X; DVD is 24X.
8-6. Compare Speed
The reading speed of drive and disc are the reasons can affect the quality
of comparison. This setting allows you to adjust the reading speed of target
drives to match up the reading speed of discs. The default setting of CD’s
compare speed is 40X, DVD is 8X.
8-7. Language
You can set a proper language for interface during operation.
8-8. Clear Setup
This setting will reset all the function back to manufacturer’s default setting.
8-9. Advanced Setup
● Power On Time: You can set a warm-up time from 5 to 99 seconds for
warming up the duplicator when it is turned on The default setting is 10
seconds.
● Start-up Menu: You can select which function you would like to show up
in the beginning.
● Skip Read Error: You can set this function enable to skip disc errors in
order to avoid bad quality of copy. If you are confident of your source disc
has only a small and insignificant error due to physical damages and can
be overlooked, you can set NO to disable this function.