8
Function Table
*Below functions and features subject to change without notice.
Silver/Golden: CF / CFast Series
Function
Description
1. Copy
Data or whole media duplication only.
2. Compare
Bit-by-bit comparison between the source and target flash medias.
3. Copy
&Compare
First copies, then compares the target to the source once duplication is
completed.
4. Media check
4.1 H3 Safe
Checks the flash’s quality by reading it. This safe check will not change
the flash’s content or format.
4.2 H5 Test
Checks the flash’s quality by reading and writing. This function will
change the flash’s content and format.
4.3 H6 Test
Checks the flash’s quality by writing and reading its empty space. This
function will not change the flash’s content or format.
4.4 Setup Range %
Sets the flash’s checking range percentage.
4.5 Setup Range MB
Sets the flash’s checking range in MB.
4.6 Set Error Limit
Sets the error tolerance range when checking the flash. (Units:
Sector/KB/MB)
4.7 Minimum Read Speed
Set the minimum read speed criteria for H3/H5/H6 checking.
4.8 Minimum Write Speed
Set the minimum read speed criteria for H5/H6 checking.
4.9 Set Capacity Limit
Sets capacity range when checking the
flash device.
4.9.1 Set Upper Limit
4.9.2 Set Lower Limit
4.9.3 Clear Limit
