22
It will take about 3 seconds to determine the exact capacity.
➋
System will show the checking result by use of Green/Red LED light.
➌
Use the
▲▼
buttons to check the status of each slot.
6.4 Quick Erase
This function erases flash data while keeping the format if the original flash format is
FAT16/32. Use the
▲▼
buttons to view status, progress, and information.
Note
Quick erase function will erase only FAT 16/32 formatted devices.
6.5 Full Erase
Completely erases the entire flash media, including format and content. This task takes
longer. Pressing <ESC> during this process will abandon the task, but the original format
and content will no longer be readable.
Note
⚫
This function supports asynchronous operation; you can continually
plug and unplug flash media without having to push any buttons.
⚫
The function may alter the data content and format of flash.
⚫
To protect source data, the system will not run a Capacity Check on
the master device.
⚫
When the red error light illuminates, you can use the
▲▼
to view
error information.
[#02] SIZE: 3781M
Capacity OK
[#04] SIZE: 8M
BAD!
Green Light
: Capacity OK
Red Light
: Error
[Erase]
1. Quick Erase
Do ERASE ALL
Confirm?
[Erase]
2. Full Erase
Do ERASE ALL
Confirm?
