7
7.2.2 Whole Media
Sets to copy the whole content of flash including the
empty space.
7.3 Button Sound
Chooses whether or not to hear a beep when a button is pressed.
7.4 Target Tolerance
Sets the tolerance % of capacity gap between the source and
target. The default setting is “No limit”.
7.5 Asynchronous
Sets Asynchronous function. “Enable” to enable Asynchronous
function, “Disable” to disable the function.
7.6 Check Before Copy
Sets whether or not to check the flash media before copy.
7.7 Power Off Time Between Copy&Compare
Sets the power-off time between Copy and Compare when
executing “Copy&Compare” function.
7.8 Auto Start After Fill Device
Sets whether or not to immediately start “copy/compare” tasks
once targets are connected.
7.9 Language
Sets system language interface i.e. English, Japanese.
7.10 Select Speed
Selects the speed of data transmission among “Fastest”, “Faster”,
“Normal”, “Slower”, and “Slowest”.
7.11
Purge Before Copy
Cleans out target device’s data and format first, and then runs
the “Copy” process.
7.12 Monitor Device After Copy
Allows user to set a device status check after duplication.
7.13 Set to Default
Restores settings to original manufacturer settings.
