12
➊
Plug flash media into the slot, select function [3. Measure Speed], then press "OK" to
start this function.
➋
Use the
↑↓
keys to view the exact "Read" and "Write" flash media speed on each port.
Note
⚫
To protect source data, the system will not execute “Measure Speed”
on the master device.
⚫
The function may alter the format and data content of flash.
6.3 Media Check
Note
⚫
Functions mentioned with “Overwrite” will change the content and
format of flash media, please do not execute this function if there is
important data stored in it.
⚫
You can set the checking area in [6.3 Media Check >> Setup Range (%
or MB)].
⚫
To protect source data, the system default setting will not execute this
function on the master device.
6.3.1 H3 Safe
This function reads the flash media to assess its quality. After executing this function, the
flash’s bad sector quantity and reading speed will be displayed.
Use the
↑↓
buttons to view the status of each port.
Note
This function will not alter the content or format.
Pass: 1 H3 SafeTest
Fail: 0 0
[#02] Bad: 0 3871M
R: 14.2MB/s
Press
▼
for further information
Test Capacity
Bad Sector
Read Speed
SD Duplicator
2. Measure Speed
[#02] Read: 14.7MB
Write: 7.0MB
