http://u-prox.com
27
Crossover
(directly to the network card in your
computer).
Figue 20
. Connection cable Ethernet
1
White-Yellow
3
2
Yellow
6
3
White-Green
1
4
Green
2
Connect the Ethernet cable into the connector terminal blocks of panel with a special
tool -
LSA punch down tool
(for example, KRONE LSA-PLUS)
To configure the Ethernet device of panel:
Enable Ethernet communication
Set network parameters of panel (do not set if you use DHCP):
o
IP address
o
Subnet Mask
o
IP address of the gateway (router) Internet 1 (not necessarily in the
local area network)
o
IP address of the gateway (router) to the Internet 2 (optional)
o
IP address of the DNS Server 1 (if data transfer of the domain name
is used)
o
IP address of the DNS Server 2 (optional, if data transfer of the
domain name is used)
Setting communication with server:
o
IP or DNS address server 1
o
IP or DNS address server 2 (address of U-Prox IC A panel, optional)
o
Access Ports (port to read and port to write)
o
Period of the link channel checking (test signal)
Wireless computer network (Wi-Fi)
Panel can operate in wireless computer networks of standards IEEE 802.11b/g/n
(2.4GHz frequency, encryption WEP (Open), WPA, WPA2).
Panel supports two Wi-Fi access points (primary and backup) for this communication
channel redundancy.
To configure the Wi-Fi device panel:
Enable Wi-Fi communication
Set up Wi-Fi (for each of used access points):
o
Network name - SSID
