15
Figure. 7a.
Dimensions, modification 1
Figure. 7b.
Dimensions, modification 1
a.
Panel will broadcast data packages announcing itself as a new
panel
b.
Data packages are received with U-Prox HE repeaters and send
to the U-Prox IC L control panel
c.
U-Prox IC L panel sends event message to the access control
system server
d.
Access control system server warns operator about the new
panel. Operator must add panel to the system database
e.
Operator must upload U-Prox IC L control panel after the
U-Prox IP500 panel added to the DB
f.
Operator must upload U-Prox IP500 panel after the adjustment it
in the DB. U-Prox IP500 panel will be connected to the certain
access control system, eliminating panel control capture with
another system.
Return panel to the factory settings to eliminate the panel
connection to the system
3.
U-Prox IP500 returns to the normal operation mode
How to work with the device
U-Prox IC L control panel shipped in
the plastic enclosure without the
power supply. Dimensions marked
on the Fig. 7.
Connection
1.
Perform initial network setup
of
control
panel
(that
specifies settings of network
parameters)
with
utility
"Configurator" via USB port
before installation, if it is impossible to adjust them automatically
2.
Prepare the place for
installation mark and
drill mounting holes
(see
Mount
recommendations
)
3.
Perform
Ethernet
wiring
4.
Perform power wiring
if it is necessary
5.
Install and fix the
enclosure cover with
screws
6.
Connect the control panel in the U-Prox IP software (according to the
software manual)
