13
The deployment is made in three steps (see Fig. 6.):
1.
U-Prox IC L control panel connection
2.
U-Prox HE repeaters connection
3.
U-Prox IP500 wireless panels connection
Fig. 6. Wireless lock system deployment
The algorithms for operation on each step described below
Server addresses automatic configuration for U-Prox IC L
1.
Panel checks for DHCP mode ON (panel address 0.0.0.0) or static IP
2.
If DHCP mode is ON, the dynamic IP address obtain routine will start
3.
The panel automatic configuration mode starts if the access control system
IP address (IP or DNS name) is not set:
a.
Panel sends data packages announcing access control system
server about itself as a new device in the local network
Despite it is broadcast announcement it limited with one range
local network and active network equipment. That’s why the IP
addresses of the access control system server are to be set
manually for networks with sophisticated topology.
b.
The system will warn operator after the receiving of the data
package from the new panel. Than operator must add panel to
the system database (DB).
c.
After the panel added to the DB it receives the answer from the
access control system server. The address of the access control
system server recorded into the control panel and it stops to
broadcast.
