15
Figure 8a.
Fixing holes
marking, modification 1
Figure. 7a.
Dimensions, modification 1
Figure. 7b.
Dimensions, modification 1
How to work with the device
U-Prox HE repeater shipped in the
plastic enclosure without the power
supply. Dimensions marked on the
Fig. 7.
Connection
1.
Perform
initial
network
setup of repeater (that
specifies
settings
of
network parameters) with
utility "Configurator" via
USB
port
before
installation,
if
it
is
impossible to adjust them
automatically
2.
Prepare
the
place
for
installation
mark and drill
mounting
holes
(see
Mount
recommendat
ions
)
3.
Perform
Ethernet wiring
4.
Perform power
wiring if it is necessary
5.
Install and fix the enclosure cover with screws
6.
Connect the repeater in the U-Prox IP software (according to the software
manual)
7.
Download the repeater
8.
The repeater is ready for operation
Mount recommendations
Place the repeater in the place, convenient for service.
To mount the repeater on the wall, perform actions:
Modifaction 1 (see Fig. 8a):
Open the enclosure cover, remove the board
and mark fixing holes using the enclosure
bottom as template
Pull the power wiring through the opening in
the enclosure
Fix the enclosure bottom
