manualshive.com logo in svg

U-Line UHFZ124-SS01B, Руководство пользователя и сервисное руководство

Поделиться
Скачать
U-Line UHFZ124-SS01B Скачать руководство пользователя страница 15

USER GUIDE

u-line.com

Door Adjustments

3. 

Remove door by tilting forward and lifting door off 

bottom hinge. Retain shoulder washers; they will be 
reused.

4.  Insert arrow clips into holes.

 
 
 
 
 
 
 
 
 
Remove bottom hinge:

1.  Remove bottom hinge from cabinet using a T-25 TORX 

screw driver to remove three screws.

2.  Remove corresponding screws on opposite side of 

cabinet. On some models there may be a nut behind 
one or both screws on either side.

Install bottom hinge: 

Install two or three screws, depending on model. Replace 
nuts if used.

Install top hinge and door:

1.  Install hinge with longer straight edge aligned to 

outside edge of cabinet. Do not tighten.

2.  Rotate door 180

o 

and set on bottom hinge.

3.  Align edge of the hinge with the outer edge of the 

unit.

4.  Tighten three hinge screws using a Torx T-25 

screwdriver.

Align and adjust the door:

Align and adjust the door (see DOOR ALIGNMENT AND 
ADJUSTMENT)

Install grille and hinge cover

15

Содержание UHFZ124-SS01B















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды