PAGE 2 OF 2
0721 IH-3456
4. Drill into wall at four marked locations with an
appropriate drill bit. (See Figure 4)
NOTE: Ensure that proper mounting hardware
is used for appropriate wall composition as
enclosed hardware may not be compatible
with your wall surface.
5. Hold dispenser to mounting place and insert screws
into previously drilled holes using either a screwdriver
or a drill. (See Figure 5)
6. Load towels into dispenser. Do not compress the
towels or overload dispenser. (See Figure 6)
7. Close and lock dispenser by turning key clockwise
to its original position. (See Figure 7)
8. Pull first towel out to begin dispensing.
(See Figure 8)
INSTALLATION AND MOUNTING INSTRUCTIONS CONTINUED
Figure 5
Figure 6
Figure 7
Figure 8
Figure 4
1-800-295-5510
uline.com
