PAGE 7 OF 8
0719 IH-8098
1. Power cord can be wrapped
around cord wraps provided
on top of tank cover located
in front and behind the handle.
(See Figure 13)
2. To remove cord from cord
wraps, grasp the sides of rear
cord wrap located behind the
handle. Turn counter-clockwise
180° until the tip of the cord
wrap is above the handle.
(See Figure 14)
3. Grasp the entire cord behind
the handle and pull above
the rear cord wrap. Pull
cord towards the front of the
vacuum until cord becomes
disconnected from front cord
wrap. (See Figure 15)
4. Grasp sides of the rear cord
wrap and turn clockwise
180° to return it to its original
position. (See Figure 16)
5. The hose holder may be
used for easy storage of the
hose. Remove accessory
from end of hose. With hose
connected to tank inlet and
front of unit facing you, wrap
hose around top of the tank
cover in a clockwise direction.
Secure end of hose by clipping it in the hose holder
attached to right side of tank cover. (See Figure 17)
6. Never allow liquids to sit in the tank for any extended
period of time.
The vacuum should be stored
indoors.
STORAGE
Figure 13
Figure 14
Figure 15
Figure 16
Figure 17
FILTERS
BEST
BETTER
GOOD
High Efficiency Collection Filter Bags
• Dry pickup only
• Fine dust and particles
• Easy to install and use
• Reduces loss of suction
Ultra Web
®
Cartridge Filter**
• Wet or dry pickup
• Easy cleanup
• Fine dust and particles
Foam Sleeve
• Wet pickup only (when used alone)
• Can be used in place of cartridge filter
for dry pickup when used with filter bag.
**Ultra Web is a registered trademark of Donaldson Co., Inc.
CAGE FILTERS
PLUS
TANK FILTERS
Cartridge Filters
Foam Sleeve
High Efficiency Collection Filter Bags
FILTER COMBINATIONS
