PAGE 3 OF 9
0321 IH-1210
ASSEMBLY CONTINUED
LOCK AND KEY ASSEMBLY
1. Remove key and nut from lock assembly and reserve.
2. Drill hole through stationary collar using circle
molded in plastic as a guide. (See Figure 6)
3. Insert front of lock through the back of the hole
drilled in stationary collar. (See Figure 7)
4. Attach nut to back of lock and tighten.
5. Use key to lock assembly. Remove key from lock.
Figure 6
Figure 7
Drill Hole Here
Stationary
Collar
1-800-295-5510
uline.com
