PAGE 2 OF 15
0915 IH-1358
SET-UP INSTRUCTIONS CONTINUED
4. Feed the tape, gummed side down, over the top
roller, under the tape guide flaps, and under the
pinch roller. (See Figure 2)
5. Place the pressure plate over the tape and release
the pinch roller. (See Figure 2)
6. Close the top cover.
FILLING WATER BOTTLE
1. Remove the water bottle from the dispenser.
(See Figure 3)
2. Remove the duckbill valve from the water
bottle. Fill the water bottle with water.
(See Figure 3)
3. Place the duckbill valve back into the water
bottle.
4. Place the water bottle back onto the
dispenser.
5. Verify that the post in the brush tank is inserted
through the duckbill valve.
Cutter
Assembly
Pinch
Roller
Shaft
Pinch
Roller
Pressure
Plate
Gummed
Side of Tape
Top Roller
Tape
Tape Roll
Figure 2
Figure 3
Post
Brush
Tank
Tape
Weight
Duckbill
Valve
Water
Bottle
Water
Bottle
Brackets
