QUICK START GUIDE
u-line.com
12
Assemble and Connect Regulator
to Nitrogen Tank
1. Attach ball valve to tank regulator. Tighten with
an adjustable wrench. Make sure valve is in the off
position - turned clockwise as far as it can go.
2. Attach regulator to nitrogen tank. Hand tighten the
coupling nut and then use an adjustable wrench for an
additional quarter turn. DO NOT OVER TIGHTEN
1. Attach black nitrogen coupler of the liquid jumper line
to keg. With your thumb on top of the coupler, pull
up on collar and press coupler down firmly onto out
valve. Release collar - listen for a click. Pull up on the
coupler to ensure it is locked down.
2. Attach other end of beverage hose to "Y" connection
within dispenser tower - line up and press in firmly.
3. Attach hose to elbow connector on infuser regulator.
Out Valve
Connect Keg to Dispenser Tower
Other end is
connected to keg
Elbow
Connector
Other end is
connected to
Tower
