PAGE 1 OF 21
0222 IH-9752
1-800-295-5510
uline.com
H-9752, H-9753
DOWNTOWN
RECEPTION DESK
NOTE: Assemble on smooth, non-marring
surface to avoid scratching.
• Use Allen wrench to tighten bolts.
• Use Phillips screwdriver to tighten camlock
pins, camlocks and screws.
• Check that all parts are included.
1. Fit support rail over corresponding bracket on leg. Use
four M6 x 12 mm bolts to secure each side of support
rail. Repeat for remaining support rail.
(See Figure 1)
To continue desk assembly (H-9752), proceed
to step 2 below.
To continue L-Desk assembly (H-9753), proceed
to L-Desk Assembly on page 4.
TOOLS NEEDED
Phillips
Screwdriver
Allen Wrench
(included)
RECEPTION DESK PARTS
DESK ASSEMBLY
Three Person Assembly
Recommended
M6 x 12 mm Bolt x 31
M6 x 65 mm Bolt x 10
Base Bracket x 2
L-Bracket x 7
Camlock Pin x 6
Camlock x 6
M6 x 15 mm Bolt x 8
72.5" Foam Strip x 1
Dowel x 4
M4 x 16 mm Screw x 4
11.75" Foam Strip x 6
10.25" Foam Strip x 2
Black Grommet Cap
x 2
Silver Grommet Cap
x 2
Floor Glide x 4
Figure 1
Follow hole patterns on frame as shown.
M6 x 12 mm Bolt
Allen Wrench
Support Rail
Leg
Para Español, vea páginas 8-14.
Pour le français, consulter les pages 15-21.
