PAGE 5 OF 21
0222 IH-9752
6. Place assembled panels around the outside of
assembled L-Desk frame with modesty panel on the
same side as grommet holes. (See Figure 12)
7. Use seven M6 x 12 mm bolts to secure desk shell to
L-Brackets. (See Figure 13)
8. Install three camlock pins and insert two dowels
in leg panel (4). Insert three camlocks into
corresponding holes in L-Desk return modesty
panel (5). (See Figure 14)
9. Fit leg panel (4) together with modesty panel (5) and
turn each camlock clockwise until it locks.
(See Figure 14)
NOTE: Figure 14 shows left-hand configuration.
For right-hand configuration, attach leg panel
to opposite side of modesty panel.
NOTE: Camlock caps are decorative. You may
install after assembly is complete.
10. Place assembled L-Desk panels around the outside
of assembled L-Desk frame with modesty panel on
the same side as grommet hole. (See Figure 15)
L-DESK ASSEMBLY CONTINUED
Figure 12
Figure 15
5
4
Figure 13
M6 x 12 mm Bolt
L-Bracket
Figure 14
Camlock
Cap
5
4
Camlock
Cap
Camlock
Dowel
Camlock
Pin
