PAGE 3 OF 9
0322 IH-8205
ASSEMBLY CONTINUED
9. Fasten tabletop to mounting plates with six wood
screws using a Phillips screwdriver, drill or 10 mm
wrench.
NOTE: For additional security, attach four remaining
wood screws to side panel mounting plate.
(See Figure 5)
10. Using a 10 mm wrench, attach front panel shelf
mount to front panel on each end and in center by
inserting one M6 x 30 mm hex bolt and one small
flat washer into threaded nut. (See Figure 5)
NOTE: Place at same height as back panel
shelf mount.
11. Insert four bottom shelf panels. They should sit on the
lower shelf lip. (See Figure 6)
12. Insert the center shelf panels with the cut sections
facing the back left, back right and center corners
of the cabinet. (See Figure 6)
13. Disassemble door handle. Reassemble door handle
with lock bar. Repeat for other door. (See Figure 7)
Figure 7
Center
Shelf Panels
Bottom
Shelf Panels
Figure 6
1-800-295-5510
uline.com
Figure 5
Shelf
Mount
Side Panel
Mounting Plate
