PAGE 4 OF 24
0621 IH-7645
SETUP
HANDLE ADJUSTMENT
1. Loosen handle adjustment lock lever and adjust
handle to desired operating height. (See Figure 1)
2. Tighten handle adjustment lock lever to lock handle
in place. (See Figure 1)
BAG INSTALLATION
1. Position handle in normal operating position.
2. Open bag compartment lid and unzip cloth bag.
(See Figure 2)
3. Install paper bag inside cloth bag. (See Figure 3)
4. Attach both bag openings together onto vacuum
intake housing. (See Figure 3)
5. Make sure bag is properly positioned inside
machine housing.
6. Completely close zipper on cloth bag and close
bag compartment lid.
NOTE: Always use cloth and paper bags
together.
BRUSH HEIGHT ADJUSTMENT
1. Vacuum has five brush adjustment levels. Raise
brush height level by lifting up height adjustment
pedal to desired brush height. (See Figure 4)
2. Lower brush height level by pushing down height
adjustment pedal to desired brush height.
(See Figure 4)
Figure 1
Figure 3
Figure 4
Figure 2
Cloth
Bag
Cloth
Bag
Paper
Bag
Vacuum
Intake
Housing
Height
Adjustment
Pedal
Zipper
