PAGE 1 OF 3
1220 IH-5181
PATIO FENCE
1-800-295-5510
uline.com
H-5181, H-5182
H-5183
PARTS
TOOL NEEDED
For H-5181 only:
For H-5182 and H-5183 only:
Post x 1
Bolt x 2
Tube
(H-5182 x 2)
(H-5183 x 4)
Panel
(H-5182 x 2)
(H-5183 x 3)
Nut x 2
Connector x 2
Base x 1
1. Insert each post into base and rotate 90º into
locking position. (See Figure 1)
2. Assemble aluminum tubes. Ensure they are fully
inserted and locked together using the groove and
small punched guide on matching tubes. Ensure
bolt holes at both ends of tube assembly are in
same direction. (See Figure 2)
INSTALLATION
Phillips
Screwdriver
Figure 1
Figure 2
90º
Male
End
Small Punched
Guide
Groove
Female
End
