PAGE 1 OF 2
0214 IH-4616
π
H-4616, H-4617
DROP OVER CABLE
PROTECTOR
1-800-295-5510
uline.com
cOmPOnEnts
NOTE: Drop over protectors do not prevent
abrasion to cable from below.
AssEmbly
Interlock with t-connectors to extend protection length.
(see Figure 1)
• Inspect areas for safety hazards.
• Assemble sections by aligning female connectors
over male connectors and press with foot to secure.
• Install cable as required. Place the protector over the
top of exposed cable/hose.
• test installation for intended use.
• Periodically inspect installation.
cHAnnEl cAPAcIty
chaNNEl capaciTy - max. DiamETEr iNchEs
H-4616
1.25" width x 1.25" height
H-4617
2.25" width x 2.25" height
lOAd cAPAcIty
the drop Over cable Protector has different load
supporting capabilities depending on type of vehicle
and temperature. suitability must be verified by testing
under actual conditions.
load-supporting capacity varies by type of loading
conditions and environmental conditions. the load
capacity decreases in warm environments. test before use
and inspect periodically.
mODEl
NO.
lOaD capaciTy pEr TirE
max lOaD 70°F (21°c)
lOaD capaciTy pEr axlE
max lOaD 70°F (21°c)
H-4616
11,700 lbs.
23,400 lbs.
H-4617
8,500 lbs.
17,000 lbs.
OPErAtInG tEmPErAturE
-40° to 120°F (-40° to 48°c)
cHEmIcAl rEsIstAncE
tested for compatibility with common motor oils, gasoline
and diesel fuel. limited resistance to brake fluids and
other chemicals.
mAtErIAl
uV-stabilized polyurethane elastomer.
iNsTrUcTiONs
Figure 1
36" lineal drop Over Protector
side View