PAGE 2 OF 6
0521 IH-4607
ASSEMBLY CONTINUED
3. Slide keyboard tray into tray brackets and snap into
place. (See Figure 2)
4. Pull keyboard tray out to ensure it is properly
installed.
5. Tighten 1/2" bolts and locknuts.
CART ASSEMBLY
1. Place bottom shelf upside down on a flat surface
with caster holes facing up. Insert casters into caster
holes and secure with rubber mallet. (See Figure 3)
NOTE: Be sure to install the swivel casters with
brakes on the front side of the cart.
2. Turn bottom shelf on its side. (See Figure 4)
3. Slide top shelf over bottom shelf, overlapping the
uprights to desired overall cart height. (See Figure 4)
4. With holes aligned, insert 3/4" bolts. Use Allen wrench
and pliers to fasten with nuts. (See Figure 4)
5. Stand cart up and place non-slip mat on top shelf.
POWER STRIP ASSEMBLY
1. Insert 1⁄" bolts through cord wrap bracket and into
top shelf. (See Figure 5)
2. Secure bolts with wing nuts using Phillips screwdriver.
(See Figure 5)
3. Snap power strip into bracket.
Figure 2
Figure 4
Figure 3
Swivel Caster
wIth Brake
Front
Back
Figure 5
Shelf
1-800-295-5510
uline.com
