background image

PAGE 1 OF 9 

0421 IH-1335

H-1335

KIHLBERG PNEUMATIC 
ROLL FEED STAPLER

1-800-295-5510

 uline.com

WARNING! Read all warnings and instructions to 
prevent injuries to yourself and to others.

1.  Wear eye protection when using tool. Always use 

other personal protection equipment as required, 

such as ear protection, hard hats, etc.

2.  Never use oxygen, combustible gases, CO2, steam 

or high pressure gas tanks as power sources for the 

PN-version of this tool; the tool may explode and 

cause serious injury. Use only dry, clean, pressure 

regulated compressed air to drive the tool.

3.  Always check tool before every use.

4.  Always disconnect the tool from the air supply and 

empty the magazine when taking a break or ending 

work, when servicing the tool, troubleshooting or 

repairing. Never leave a loaded tool unattended.

5.  Always assume that the tool is loaded. Respect the 

tool as potentially dangerous. Never point the tool at 

yourself or anyone else, whether it contains staples 

or not. Always remove finger from trigger when not 

driving staples.

6.  Never hold your hand or another part of your body 

under the tool.

7.  Position yourself in a firmly balanced position when 

using or handling the tool.

8.  Do not modify the tool or set it up in a jig without 

manufacturer's approval.

9.  Use stapler with cardboard ONLY. No other use is 

permitted without the approval of the manufacturer.

SAFETY WARNINGS

Para Español, vea páginas 4-6.

Pour le français, consulter les pages 7-9.

Содержание H-1335










Отзывы: