PAGE 8 OF 30
0917 IH-1030
DRIVER REPLACEMENT
1. Disconnect the air supply.
2. Loosen screw and nut with a 8mm spanner wrench
and a 4mm Allen wrench. (See Figure 15)
3. Remove the magazine assembly. (See Figure 16)
4. Loosen the set screw with a 3mm Allen wrench to
unlock the adjusting rod.
OPERATING INSTRUCTIONS CONTINUED
5. Slide the linkage mechanism and adjusting rod
simultaneously from the collar. (See Figure 17)
6. Loosen the screws with a 3mm Allen wrench.
(See Figure 18)
7. Take off the spring pin with a hammer and 6mm
straight rod. (See Figure 19)
Figure 15
Figure 17
Figure 16
Figure 18
Figure 19
Magazine Assembly
